|
Express-DN7
收藏
产品说明
Express-DN7 COM Express Basic Size Type 7 Module with Intel Atom® C3000 SoC
Features Intel Atom® Processor C3000 SoC (up to 16 cores),supports full virtualization (VT-d/VT-x) Up to 48GB ECC DDR4 memory at max. 2400MHz(and non-ECC supported) Up to 2x PCIe x8 Gen3 for flexible expansion Up to 4x 10GBASE-KR ports IEEE 1588 Precision Time Protocol (PTP) support forreal-time applications Extreme Rugged operating temperature range:-40°C to +85°C (build option for eTEMP SKUs) Supports Smart Embedded Management Agent (SEMA) functions Specifications ● Core System CPU Intel Atom® Processor C3000 SoC, 14nm (formerly codename: “Denverton-NS”) Atom® C3808 2.0GHz 12MB, 25W (12C/2133MHz, eTEMP) Atom® C3708 1.7GHz 16MB, 17W (8C/2133MHz, eTEMP) Atom® C3508 1.6GHz 8MB, 12W (4C/1866MHz, eTEMP) Atom® C3308 1.6/2.1GHz 4MB, 10W (2C/1866MHz, eTEMP) Atom® C3958 2.0GHz 16MB, 31W (16C/2400MHz, by request) Atom® C3858 2.0GHz 12MB, 25W (12C/2400MHz, by request) Atom® C3758 2.2GHz 16MB, 25W (8C/2400MHz, by request) Atom® C3558 2.2GHz 8MB, 16W (4C/2133MHz, by request) Atom® C3538 2.1GHz 8MB, 15W (4C/2133MHz, by request) Atom® C3338 1.5/2.2GHz 4MB, 9W (2C/1866MHz, by request) Supports: Intel® Quick Assist Technology (Crypto and Compression accelerator), Intel® VT (including VT-x, VT-d, VT-x with Extended Page Tables), Intel® Turbo Boost Technology 2.0, Intel® SSE4.2, Intel® 64 Architecture, Intel® ISA compatibility, Intel® Execute Disable Bit, Intel® OS Guard, Intel® Secure Key, Intel® AES-NI, Intel® Security Hash Algorithm Extensions (SHA-1, SHA-256) Note: Availability of features may vary between SoC SKUs Memory Up to dual channel 2400/2133/1866 MHz DDR4 ECC (or non-ECC), up to 48GB in three SODIMM sockets Notes: Memory frequency & capacity depends on SKUs; 3rd SO-DIMM supported by build option. Embedded BIOS AMI EFI with CMOS backup in 16MB SPI BIOS Cache 16MB for C3708/C3958/C3758, 12MB for C3808/C3858, 8MB for C3508/C3558/C3538, 4MB for C3308/C3338 Expansion Busses Up to 1 PCI Express x8 Gen3; CD connector (lanes 16-23 x8, x4, x2 (or x1), four controllers) Up to 1 PCI Express x8 Gen3; AB & CD connector, lanes 0-7 (x8, x4, x2 (or x1),four controllers, dependent on GbE support) LPC bus, SMBus (system) , I2C (user) Note: PCI Express ports dependent on SoC SKU SEMA Board Controller Supports voltage/current monitoring, power sequence debug support,AT/ATX mode control, logistics and forensic information, flat panel control,general purpose I2C, failsafe BIOS (dual BIOS ), watchdog timer and fan control Debug Headers 40-pin multipurpose flat cable connector for use with DB-40 debug moduleproviding BIOS POST code LED, BMC access, SPI BIOS flashing, powertestpoints, debug LEDs MIPI60 header for debug of CPU (build option) 10G Ethernet Intel® MAC/PHY Intel® 10G Ethernet Controller integrated in SoC (two controllers) 10G Interface Up to 4x 10GBASE-KR (bandwidth dependent on SoC SKU) Ethernet Intel® MAC/PHY Intel® i210 Interface 10/100/1000 GbE connection NC-SI NC-SI supported on AB connector, connected to GbE controller Specifications Multi I/O and Storage USB Up to 2x USB 3.0/2.0 (USB 0,1), 2x USB 2.0 (USB 2,3) Note: USB ports dependent on SoC SKU SATA Up to 2x SATA 6Gb/s (SATA 0,1) Note: SATA ports dependent on SoC SKU Serial 2 UART ports with console redirection GPIO/SD 4 GPO and 4 GPI (GPI with interrupt) eMMC eMMC 5.0 (build option) 8GB/16GB/32GB/64GB As storage device Super I/O Supported on carrier if needed (standard support for W83627DHG-P) TPM (build option) Chipset: Infineon Type: TPM 2.0 Power Standard Input: ATX = 12V±5% / 5Vsb ±5% or AT = 12V±5% Wide Input: ATX = 8.5-20 V / 5Vsb ±5% or AT = 8.5-20V Management: ACPI 5.0 compliant, Smart Battery support Power States: C1-C6, S0, S1, S4, S5 , S5 ECO mode (Wake-on-USB S4, WOL S4/S5) ECO mode: Supports deep S5 mode for power saving Mechanical and Environmental Form Factor: PICMG COM.0, Rev 3.0 Type 7 Dimension: Basic size: 125 mm x 95 mm Operating Temperature Standard: 0°C to 60°C Extreme Rugged: -45°C to +85°C (optional by project basis, only for eTEMP SKUs) Humidity 5-90% RH operating, non-condensing 5-95% RH storage (and operating with conformal coating) Shock and Vibration IEC 60068-2-64 and IEC-60068-2-27 MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A,Table 214-I, Condition D HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test Operating Systems Standard Support Windows Server 2012/2016 64-bit, Yocto Linux 64-bit) Extended Support (BSP) Yocto Linux 64-bit Functional Diagram
Ordering Information Express-DN7-C3808 Basic size COM Express Type 7 module with Intel Atom®C3808, 12C (eTEMP) Express-DN7-C3708 Basic size COM Express Type 7 module with Intel Atom®C3708, 8C (eTEMP) Express-DN7-C3508 Basic size COM Express Type 7 module with Intel Atom®C3508, 4C (eTEMP) Express-DN7-C3308 Basic size COM Express Type 7 module with Intel Atom®C3308, 2C (eTEMP) Express-DN7-C3958 Basic size COM Express Type 7 module with Intel Atom®C3958, 16C Express-DN7-C3858 Basic size COM Express Type 7 module with Intel Atom®C3858, 12C Express-DN7-C3758 Basic size COM Express Type 7 module with Intel Atom®C3758, 8C Express-DN7-C3558 Basic size COM Express Type 7 module with Intel Atom®C3558, 4C Express-DN7-C3538 Basic size COM Express Type 7 module with Intel Atom®C3538, 4C Express-DN7-C3338 Basic size COM Express Type 7 module with Intel Atom®C3338, 2C Note: C3958, C3858, C3758, C3558, C3538, C3338 support by project basis Accessories Heat Spreaders HTS-DN7-B Heatspreader for Express-DN7 with threaded standoffs for bottom mounting HTS-DN7-BT Heatspreader for Express-DN7 with through hole standoffs for top mounting Passive Heatsinks THS-DN7-BL Low profile heatsink for Express-DN7 with threaded standoffs for bottom mounting THS-DN7-BLT Low profile heatsink for Express-DN7 with through hole standoffs for top mounting THSH-DN7-BL High profile heatsink for Express-DN7 with threaded standoffs for bottom mounting Active Heatsink THSF-DN7-BL High profile heatsink with fan for Express-DN7 with threaded standoffs for bottom mounting Starter Kit Starterkit COM Express Type 7 Starter Kit Plus-Full Fiber COM Express Type 7 Starter Kit Plus-Full Copper Note: Two starter kits are available: one supporting SPF+ and one supporting 10GBASE-T 10G BASE-KR Support
Notes: * All specifications are subject to change without further notice. * “Build option” indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product.Please contact our sales representatives. * All modules above support to connect to optical PHY as default. connect to copper PHY is by project basis I/O support on different SOCs
|








