|
Express-BD7
收藏
产品说明
Express-BD7 COM Express Basic Size Type 7 Module with Intel® Xeon® D and Pentium® D SoC
Features Intel® Xeon® D and Pentium® D SoC (up to 16 cores) Up to 32GB dual channel DDR4 at 1867/2133/2400MHz ECC(dependent on SoC SKU) Two 10G Ethernet and NC-SI support Up to eight PCIe x1 (Gen2), one PCIe x16 (Gen3) GbE, two SATA 6 Gb/s, four USB 3.0/2.0 Supports Smart Embedded Management Agent (SEMA®)functions Extreme Rugged operating temperature: -40°C to +85°C(build option with selected SoC SKU) Specifications Core System CPU Intel® Xeon® D and Pentium® D SoC, 14nm process (formerly”Broadwell-DE”) Xeon® D1559 1.6/2.1GHz 18MB, 45W (12C/Up to 2133) (eTEMP) Xeon® D1539 1.6/2.2GHz 12MB, 35W (8C/Up to 2133) (eTEMP) Xeon® D1519 1.5/2.1GHz 6MB, 25W (4C/Up to 2133) (eTEMP) Xeon® D1577 1.3/2.1GHz 24MB, 45W (16C) Xeon® D1548 2.0/2.6GHz 12MB, 45W (8C/Up to 2400) Xeon® D1527 2.2/2.7GHz 6MB, 35W (4C/Up to 2133) Pentium® D1508 2.2/2.6GHz 3MB, 25W (2C/Up to 1866) Note: SKUs not listed above and D1577/D1559 may be supported on a project basis.pleasecontact your ADLINK representative. Supports: Intel® VT (including VT-x, VT-d, VT-x with Extended Page Tables), Intel® HT Technology, Intel® SSE4.2, Intel® 64 Architecture, Intel® Turbo Boost Technology 2.0, Intel® AVX2, Intel® TSX-NI, Intel® Platform Protection Technology with Intel® TXT, Execute Disable Bit, Intel® Data Protection Technology with Intel® Secure Key, Intel® AES-NI Note: Availability of features may vary between processor SKUs. Memory Dual channel 1867/2133/2400 MHz DDR4 ECC memory up to 32GB in dualSODIMM sockets (dependent on SoC SKU) Embedded BIOS AMI EFI with CMOS backup in 16MB SPI BIOS Cache 24MB for D1577 18MB for D1559 12MB for D1548/D1539 6MB for D1527/D1519 3MB for D1508 Expansion Busses PCIe x16 or 2 PCIe x8 or 4 PCIe x4 (Gen3) 6 PCI Express x1 (Gen2): AB connector, Lanes 0/1/2/3/4/5 Up 2 PCI Express x1 (Gen2): CD connector, Lanes 6/7 LPC bus, SMBus (system) , I2C (user) Note: PCI Express lane 7 support in place of GbE SEMA Board Controller Supports: Voltage/current monitoring, power sequence debug support, AT/ATX mode control, logistics and forensic information, flat panel control,general purpose I2C, failsafe BIOS (dual BIOS ), watchdog timer and fancontrol Debug Headers 40-pin multipurpose flat cable connector for use with DB-40 debug moduleproviding BIOS POST code LED, BMC access, SPI BIOS flashing, powertestpoints, debug LEDs 60-pin XDP header for ICE debug of CPU/chipset 10G Ethernet Intel® MAC/Controller Intel® 10G Ethernet Controller integrated in SoC 10G Interface 2x 10GBASE-KR 10G Sideband Signals 10G_INT 10G_PHY_MDC/MDIO 10G_PHY_SEL 10G_PHY_RST 10G_LED_I2C 10G_SFP_I2C 10G_SDP NC-SI NC-SI supported on AB connector Ethernet Intel® MAC/PHY: Intel® Ethernet Connection i210-LM with Intel® AMT 10.0support Interface: 10/100/1000 GbE connection Multi I/O and Storage USB: 4x USB 3.0/2.0 (USB 0, 1, 2, 3) SATA: 2x SATA 6Gb/s (SATA0,1,2,3) Serial: 2 UART ports with console redirection GPIO: 4 GPO and 4 GPI Super I/O Supported on carrier if needed (standard support forW83627DHG-P) Specifications TPM Chipset: Infineon Type: TPM 2.0 Power Standard Input: ATX: 12V±5%, 5Vsb ±5%; AT: 12V±5% Wide Input: ATX: 8.5-20V, 5Vsb ±5%; AT: 8.5-20V Management: ACPI 5.0 compliant, Smart Battery support Power States: C1-C6, S0, S1, S3, S4, S5 , S5 ECO mode (Wake-on-USB S3/S4,WOL S3/S4/S5) Note: 10G WOL is TBD ECO mode: Supports deep S5 mode for power saving Operating Systems Standard Support Windows Server 2012 (64-bit), Linux (64-bit) Extended Support (BSP) TBD Mechanical and Environmental Form Factor: PICMG COM.0 Rev 3.0 , Type 7 Dimension: Basic size: 125 mm x 95 mm Operating Temperature Standard: 0°C to 60°C Extreme Rugged: -45°C to +85°C (build option, standard voltage only) Note: Extreme Rugged availability dependent on SoC SKU Humidity 5-90% RH operating, non-condensing 5-95% RH storage (and operating with conformal coating) Shock and Vibration IEC 60068-2-64 and IEC-60068-2-27 MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test Note: “build option” indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product. Be aware that these “build option” part numbers will need to be newly created and this will result in production lead times. Functional Diagram
Ordering Information Express-BD7-D1559 Basic COM Express Type7 module with Intel Broadwell-DE D1559, 12C (eTEMP) Express-BD7-D1539 Basic COM Express Type7 module with Intel Broadwell-DED1539, 8C (eTEMP) Express-BD7-D1519 Basic COM Express Type7 module with Intel Broadwell-DED1519, 4C (eTEMP) Express-BD7-D1577 Basic COM Express Type7 module with Intel Broadwell-DED1577, 16C Express-BD7-D1548 Basic COM Express Type7 module with Intel Broadwell-DED1548, 8C Express-BD7-D1527 Basic COM Express Type7 module with Intel Broadwell-DED1527, 4C Express-BD7-D1508 Basic COM Express Type7 module with Intel Broadwell-DED1508, 2C Accessories Heat Spreaders HTS-BD7-BL Heatspreader for Express-BD7 with threaded standoffs forbottom mounting HTS-BD7-BTL Heatspreader for Express-BD7 with through hole standoffs fortop mounting Passive Heatsinks THS-BD7-BL Low profile heatsink for Express-BD7 with threaded standoffsfor bottom mounting THS-BD7-BTL Low profile heatsink for Express-BD7 with through holestandoffs for top mounting THSH-BD7-BL High profile heatsink for Express-BD7 with threaded standoffsfor bottom mounting Active Heatsink THSF-BD7-BL High profile heatsink with fan for Express-BD7 with threadedstandoffs for bottom mounting Starter Kit COM Express Type 7 Starter Kit Plus Starter kit for COM Express Type 7 |

